Primary Navigation
Sampling Equipment
KP Series
The KP series pushbutton sampling valve taps hot active fluid in pressurized systems in seconds. Tested for 1 million cycles, this valve installs in minutes while the unique rotating spout allows one hand sampling. The compact design comes with a choice of threads and seals. No probes required.
KP Series Pushbutton Sampling Valve Spec Sheet & Ordering Information - (375K, PDF)
KST Series
The KST Series probe sampling valve is easy to use. The probe taps hot active fluid in pressurized systems in seconds. Tested for 1 million cycles, this valve includes a rugged metal cap with backup seal. The KST Series comes with a choice of threads and seals.
KST Series Probe Sampling Valve Spec Sheet & Ordering Information - (387K, PDF)
Vacuum Pump
The Vacuum Pump is used to extract samples from a dipstick or non-pressurized system. The pump is attached to the sample jar, a tube is inserted into the pump and then into the dipstick or oil fill about half-way. By activating the pump handle, the sample jar should then be fill about 3/4 full. Tubing is available in 100 ft. and 1,000 ft. rolls. Sample jars and tubing sold separately.
Red Cap
The Red Cap Push Button Valve can be installed on any pressurized system with 4 to 100 lbs psi and should also be installed upstream of the filter. Every Red Cap Valve is checked for leaks, and every cap checked for cleanliness at completion of manufacture. Available in 1/4″ and 1/8″ sizes, the Red Cap Valve is fast, safe and does not require any tubing or additional items to complete sampling. Wearing protective gloves when taking samples from engines or any unit where operating temperatures exceed 160 degrees, as the red cap can become extremely hot during sampling. Order Red Cap
Quick Links
Top
News
POLARIS Laboratories® Announces 2013 Public Training Classes
POLARIS Laboratories®, an innovative leader in the fluid analysis industry, has announced its public training class schedule for 2013. Whether attendees are just beginning to establish fluid analysis best practices or they've been in the industry for years, these classes will expand their knowledge of oils and coolants and help them understand the importance of doing fluid analysis and doing it well.
POLARIS Laboratories® Opens New Fluid Testing Lab in Moscow, Russia
The company has now expanded into Russia with the opening of POLARIS Laboratories® Russia, the official representative of POLARIS Laboratories®, located in Moscow.
Training
Denver
Cooling Systems Maintenance
May 28, 2013Denver
Oil Analysis
May 29-30, 2013Orlando
Oil Analysis
July 24-25, 2013
Tradeshows & Conferences
Saskatchewan Oil and Gas Show
Weyburn, SK
June 5-6, 2013Oil Sands Trade Show
Fort McMurray, AB
September 10-11, 2013
Secondary Navigation
